Loggin Two Deep Pour Epoxy
Loggin Two is a two-part casting epoxy that is VOC-free, has excellent UV Resistance, 100% solids, and odor free. This product can be poured at very thick levels (1 3⁄4 inch or more) while keeping a crystal-clear look. Thickness above 1 3⁄4 inch can be achieved depending on the total volume and the shape of the pour. It displays excellent air release and color retention capabilities. It also possesses superior mechanical properties.
Perfect for Charcuterie Trays, Small-Medium sized River Tables and large void filling. The larger the pour the higher chance of your epoxy heating up during the chemical reaction, we recommend you monitor temp and use Fans/AC when necessary to cool the epoxy.
While we work closely with our chemists to ensure our epoxy resists crystallization, it can still occasionally occur, especially when exposed to cold temperatures. If your kit appears chunky, gently warm the resin in a water bath until it returns to a smooth consistency. Do not use crystallized resin as it may compromise the quality of your project.
Loggin Two is a two-part casting epoxy that is VOC-free, has excellent UV Resistance, 100% solids, and odor free. This product can be poured at very thick levels (1 3⁄4 inch or more) while keeping a crystal-clear look. Thickness above 1 3⁄4 inch can be achieved depending on the total volume and the shape of the pour. It displays excellent air release and color retention capabilities. It also possesses superior mechanical properties.
Perfect for Charcuterie Trays, Small-Medium sized River Tables and large void filling. The larger the pour the higher chance of your epoxy heating up during the chemical reaction, we recommend you monitor temp and use Fans/AC when necessary to cool the epoxy.
While we work closely with our chemists to ensure our epoxy resists crystallization, it can still occasionally occur, especially when exposed to cold temperatures. If your kit appears chunky, gently warm the resin in a water bath until it returns to a smooth consistency. Do not use crystallized resin as it may compromise the quality of your project.
Loggin Two is a two-part casting epoxy that is VOC-free, has excellent UV Resistance, 100% solids, and odor free. This product can be poured at very thick levels (1 3⁄4 inch or more) while keeping a crystal-clear look. Thickness above 1 3⁄4 inch can be achieved depending on the total volume and the shape of the pour. It displays excellent air release and color retention capabilities. It also possesses superior mechanical properties.
Perfect for Charcuterie Trays, Small-Medium sized River Tables and large void filling. The larger the pour the higher chance of your epoxy heating up during the chemical reaction, we recommend you monitor temp and use Fans/AC when necessary to cool the epoxy.
While we work closely with our chemists to ensure our epoxy resists crystallization, it can still occasionally occur, especially when exposed to cold temperatures. If your kit appears chunky, gently warm the resin in a water bath until it returns to a smooth consistency. Do not use crystallized resin as it may compromise the quality of your project.
Uses and Substrates
The LOGGIN TWO provides excellent results for the most demanding applications:
• River tables
• Wood crafting
• Crystal clear encapsulation
• Bonds to wood, metals, concrete, plastics, fiberglass, paint,
granite, laminate (see Laminate/Formica Application section), etc.
Just mix 2 Parts “A” to 1 Part “B” for 7-9 minutes,
add pigments to achieve desired color,
then mix again to ensure color consistency.
• For pours 1/2”-2” Thick
• Tack-free after 26 hours
• De-mold 3-4 days
• Full cure time is ambient temp + volume dependent
• Mix at a 2:1 ratio (2 Parts A, 1 Part B)
Made In Canada by LabSurface
Advantages
• Excellent UV resistance
• Crystal clear
• Can be poured at very thick levels
• Ultra-low viscosity, very nice glossy finish
• Environment and health friendly (100% solids, VOC-free
and no solvent)
• Food safe
• Virtually odor free
• Easy application with ultra-long pot life
and working time
• Ideal for casting, can also be used for small encapsulation
applications
• Good elongation and excellent abrasion resistance
• High resistance to amine blush and
contamination (fish eyes)
• Excellent for letting out bubbles, even with thick layers
• Impermeability / low moisture sensitivity
• High density of the product prevents dirt penetration resulting
in low maintenance post application